FEATURES & BENEFITS
| ■ |
Up to 200Mbps Ethernet transmission speed over the existing coaxial cables |
| ■ |
Universal Digital I/O interface |
| ■ |
Up to 2.5 KM of operational distance |
| ■ |
Redundant 11-48Vdc power input |
| ■ |
3DES 168-bit, AES 128-bit and AES 256-bit encryption for secure data transmission |
| ■ |
168-bit Tri-DES encryption for secure data transmission |
| ■ |
LED diagnostic for easy performance visual indication |
| ■ |
Ident-and-Connect™ feature allows ease of network scan and network segmentation |
| ■ |
Web based remote configurability |
| ■ |
Integrated Quality of Service (QOS) allows reliable triple play applications |
| ■ |
Compliance with IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX , UPA |
| ■ |
Virtual CAT5™ capability via twisted pair telephone lines, AC wiring |
| ■ |
BNC coaxial port with build in 1KVdc Isolation protection for high surge and power variation |
OVERVIEW
The Aboundi APL3400-200 UltraSpeed™ CoaxLine Quad Ethernet I/O Control NetBridge™ enables the efficient networking deployment utilizing the existing coaxial cabling or the telephone
grade copper wiring infrastructure already in place. It provides a reliable high speed Ethernet connection cost effectively without the folk lift upgrade for any high speed IP based networking applications.
The APL3400-200 NetBridge™ enable digital event handling, alarm notification, sensors and turning on and off equipments remotely by the digital I/O interface. This can be quickly installed for a verity of commercial applications where high speed
bandwidth connection with additional control features may be required.
The APL3400-200 NetBridge™ is fully compatible with all Electric Connect UltraSpeed™ series and accessories.
SPECIFICATIONS*
Compliance:
‧ IEEE802.3 10BASE-T
‧ IEEE802.3u 100BASE-TX
‧ UPA DHA (200Mbps)
Frequency Band:
‧ 2MHz ~ 30MHz
Dynamic Range:
‧ 50dB
Interface:
‧ Four shielded RJ-45 Connectors
‧ One 50 ohm BNC-Type Connector
‧ Two Digital Input Terminals
‧ Two Digital Output Terminals
Security Encryption:
‧ 3DES 168 bits, AES 128 bits, AES 256 bits algorithms
QOS:
‧ VLAN IEEE802.1 p/q
Max. Nodes:
‧ Supports up to sixteen APL3400-200 per network domain
Mechanical:
‧ W x D x H : 102 x 30 x 120 mm / 4 x 1.2 x 47.5 inch
‧ Weight : 260 g (0.6 lb)
LED:
‧ Power LED: Green ( PWR )
On: Power On Off: Power Off
‧ Status LED:
PowerLine :
Blue ( LNK/ACT) On : Link speed over 12 Mbps
Purple ( LNK/ACT) On : Link speed between 6-12 Mbps
Amber ( LNK/ACT) On : Link speed under 6 Mbps
Blink : Activity
Ethernet Ports : Green ( LNK/ACT Ports 1-4)
On : Link Blink : Activity
Environmental:
‧ Temperature
Operating : -20 ~ +65°C/ -4 ~ +149°F
Storage : -20 ~ +80°C/ -4 ~ +176°F
‧ Humidity
Operating : 5 ~ 95% RH (non-condensing)
Storage : 0 ~ 95% RH (non-condensing)
Power Supply:
‧ Input rating : DC 11V ~ 48V , 0.6A or AC 24 ~ 38V
‧ Polarity reversal protection
‧ Redundant power input with 4-pin pluggable terminal block
EMC/ Safety Certification:
‧ FCC Part 15, Class B
‧ CE Class B (EN55022/55024 & EN50412-2-1)
‧ UL, cUL
‧ CB Scheme
ORDERING INFORMATION
APL3400-200-04: NetBridge with IO Control
|
APL3400-200
Download 
TOP